Impact Testing Machine SRI IT30

We offer highly advanced Impact Testing Machine for the clients both in domestic and international market. The pendulum impact tester manufactured is designed for conducting Izod and Charpy test. These machines are designed in conformation to IS 1598, IS 1757, IS 1499 & BS 131 as well as ASTM – E – 23 and plastic impact as per IS 867 & ASTM – D – 256. Machines with digital readout can also be availed by the clients at very nominal prices in the market.

Digital Impact Testing Machine SRI ITME 30

The Pendulum Impact Tester Model SRI - IT 30 is designed for conduction Izod & Charpy Test. The test methods confirm to BS:131:PART 4-1972 (Amended 15 Aug. 1993) & BSEN: 10045 - 2 : 1993.
The Pendulum is mounted on anti friction bearings. It has two starting positions, the upper one for Charpy and the lower one for Izod testing. On release, the Pendulum swing down to break the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture & height of raise after rapture of the test specimen and is read from Digital Panel.

There are strikers & one combined support available for fitting into the Pendulum & on to the base of the machine for Izod, Charpy test. Changing from one striker to another is achieved simply by fixing the new striker into its position.

Maximum Capacity 300 J/168 J 300 J / 170 J
Minimum Scale Graduation 2J 0.5 J
Overall Size (Approx.) 1.65 m (H) 1.65 m x 0.45 mx
1.1 m x 0.45 mx 1.65 m (H)
Net Weight (Approx.) 375 Kg. 375 Kg.

  • Caliper gauge for checking V notch for Izod & Charpy as per BS:131 :PART 1, 2, 3
  • Depth notch gauge including V & U notch, angle & radius.
  • Self centering tong.
  • V - notch milling cutter.
  • U - notch milling cutter.

The Pendulum supported in the starting positions is by a self resetting latch. The release mechanism is operated by lever. The Pendulum release latch is operated only when this lever is operated.

Charpy Test

The Charpy test piece rests on alloy steel supports anvils fitted on the base of the machine rigidly held in position by alien screws. End stopper is provided for quickly & accurately locating the test piece centrally between the supports.

Izod Test

The Izod test piece is clamped vertically in Izod support anvils, fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece & alien screw enable clamping of the test piece in correct height with the help of Izod setting gauge supplied.